CETME Model L Parts Kit, 5.56mm NATO
As low as $395.89
In stock
Original CETME Model "L" parts set, 5.56 NATO, USED
Sold as a kit (as pictured).
These kits are complete minus the barrel and receiver.
The rear sight windage screw may have the tip missing.
No de-milled barrel or receiver pieces are included.
Kits are OD green in color, and show significant wear from years of military service.
These kits will be faded, discolored, and may have scratches deep into the synthetic stock.
Parts must be inspected and tested by a qualified and competent gunsmith or armorer before use in a firearm.
Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.
Original CETME Model "L" parts set, 5.56 NATO, USED
Sold as a kit (as pictured).
What a find! If you already have a CETME "C", now you can have it's younger brother, too!
These kits are complete minus the barrel and receiver.
The factory trunnion remains inside the sheet metal front end.
The rear sight windage screw may have the tip missing.
No de-milled barrel or receiver pieces are included.
Kits are OD green in color, and show significant wear from years of military service.
These kits will be faded, discolored, and may have scratches deep into the synthetic stock.
The CETME-L is chambered for the 5.56mm NATO round, and accepts standard AR15/M16 magazines.
These kits will come with one of two types of flash hiders, either a 3-Prong or a standard A2 "Birdcage" device (NO Selection is available).
The bayonet lug and sling ring are still intact, attached to the front sight block.
GET YOURS TODAY!!!
General Information about the CETME Model L rifle
Caliber: 5.56x45 mm NATO (.223 Remington)
Action: delayed blowback
Overall length: 925 mm
Barrel length: 400 mm
Weight: 3.4 kg empty
Rate of fire: 600-750 rounds per minute
Magazine capacity: 12 or 30 rounds
The Model L rifle was developed by the Spanish company CETME (now Santa Barbara SA) as an improvement over the previous CETME C. These CETME rifles, have their roots in the WW2 German MP43/MP44/Stg.45 assault rifle, developed by Mauser. After WW2, some Mauser designers moved to Spain and began working for CETME, where eventually the CETME C was developed, chambered for 7.62mm NATO cartridge. CETME continued development. In the mid 1960’s CETME design engineers began working on a smaller caliber rifle. Development was completed in 1980 when the first prototype Model L appeared using the 5.56mm cartridge. The production of the Assault Rifle Model L began in 1984, and was adopted by the Spanish army.
In 1999, this rifle was replaced in service by the H & K G36E assault rifle.
Like the all the earlier guns the CETME model L is a delayed blowback operated, selective fire assault rifle. The bolt has two parts. There are two rollers in the bolt head, which are used to accelerate the bolt body and to retard the bolt head which maintains the cartridge in the chamber until the firing pressure drops. The chamber walls are grooved to help extraction. The Model L rear sight is a simple flip-up "L" shaped sheet with two openings 200 and 400 meters. The magazine opening is designed to accept M16-type magazines.
Parts must be inspected and tested by a qualified and competent gunsmith or armorer before use in a firearm.
Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.
| SKU | CET-L-CON |
|---|---|
| Length (Dimension) | 18 |
| Height (Dimension) | 12 |
| Width (Dimension) | 5 |
| Country of Manufacture | Spain |
| Finish | Original Finish |
| Manufacturer | CETME, Santa Barbara, Spain |
