RAS47 Barrel Assembly, 16.25" length, w/ Trunnion, Stamped, Stripped Sights, Nitrided, 7.62X39, 922(r) *Unused*
US Manufactured RAS47 16.25 inch populated AK Barrel Assembly with front trunnion, rear sight base and gas block, nitrided, stripped sights, 7.62X39, *Unused*, 922(r) compliant part.
Sold individually.
This is a *NEW* US made 16.25 inch length barrel.
These were originally manufactured to be RAS47 series of US made rifles, and then the receiver was torch cut.
The barrel is non-chrome lined and the muzzle is threaded 14X1mm Left Hand thread.
The US made stripped front and rear sight blocks, gas block, trunnion, bullet guide, and handguard retainer are installed
Muzzle brake and front sight post are NOT included.
Trunnion is still riveted to forward section of the torch cut stamped receiver, and bullet guide is installed.
a section of the bottom of the receiver has been cut out to expose the bullet guide pin (as pictured).
We do not have any of the external dimensions & journal sizes.
The barrel will count as one part toward 922(r) compliance.
Parts must be inspected and tested by a qualified and competent gunsmith or armorer before use in a firearm.
Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.
US Manufactured RAS47 16.25 inch populated AK Barrel Assembly with front trunnion, rear sight base and gas block, nitrided, stripped sights, 7.62X39, *Unused*, 922(r) compliant part.
Sold individually.
The perfect barrel for your next project!
This is a *NEW* US made 16.25 inch length barrel.
These were originally manufactured to be RAS47 series of US made rifles, and then the receiver was torch cut.
The barrel is non-chrome lined and the muzzle is threaded 14X1mm Left Hand thread.
The US made stripped front and rear sight blocks, gas block, trunnion, bullet guide, and handguard retainer are installed
Muzzle brake and front sight post are NOT included.
Trunnion is still riveted to forward section of the torch cut stamped receiver, and bullet guide is installed.
a section of the bottom of the receiver has been cut out to expose the bullet guide pin (as pictured).
We do not have any of the external dimensions & journal sizes.
The barrel will count as one part toward 922(r) compliance.
Parts must be inspected and tested by a qualified and competent gunsmith or armorer before use in a firearm.
Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.
SKU | BBL-16129 |
---|---|
Weight | 3.130000 |
Length (Dimension) | 18.25 |
Height (Dimension) | 3 |
Width (Dimension) | 1.5 |
Country of Manufacture | United States |
Type | Steel |
Finish | NiBX (Nitride) |
Manufacturer | Made in the USA |
Condition | Unused |
Color | Black |
Condition | New Old Stock |
Barrel Length | 16" |