CETME Model LC Parts Kit With Collapsible Stock, 5.56mm NATO

As low as $0.00

SKU
CETLKT-BNDL-6936

Out of stock

Original CETME Model "LC" parts set, steel collapsible stock, 5.56X45 NATO, USED

Sold as a kit (as pictured).
These kits are complete minus the barrel and receiver.
No de-milled barrel or receiver pieces are included.
The factory trunnion remains inside the sheet metal front end.
Cetme LC variants have a 2 position collapsible steel stock, with the arms of the stock sliding along the receiver.
Kits are OD green in color, and show finish wear mostly around the front of the trunnion (where the hand guard goes) and the square edges of the cocking tube.
These kits may have faded color, and may have some scratches in the stock arms.
It is possible that some of the parkerized metal finish may be brown from service use. 
These kits will come with one of two types of flash hiders, either a 3-Prong "Duckbill" or a standard A2 "Birdcage" device (NO Selection is available).

Parts must be inspected and tested by qualified and competent gunsmith or armorer before use in a firearm.
Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.

WARNING: This product has been restricted in some states. Please visit our shipping restrictions to find out whether it is legal for us to ship this item to you PRIOR TO CHECKOUT. Always consult your local laws and ordinances.

Original CETME Model "LC" parts set, steel collapsible stock, 5.56X45 NATO, USED

Sold as a kit (as pictured).

What a find! If you already have a CETME "C", now you can have it's younger brother, too!
These kits are complete minus the barrel and receiver.
No de-milled barrel or receiver pieces are included.
The factory trunnion remains inside the sheet metal front end.
Cetme LC variants have a 2 position collapsible steel stock, with the arms of the stock sliding along the receiver.
Kits are OD green in color, and show finish wear mostly around the front of the trunnion (where the hand guard goes) and the square edges of the cocking tube.
These kits may have faded color, and may have some scratches in the stock arms.
It is possible that some of the parkerized metal finish may be brown from service use. 
The CETME-LC is chambered for the 5.56mm NATO round, and accepts standard AR15 / M16 magazines.
These kits will come with one of two types of flash hiders, either a 3-Prong "Duckbill" or a standard A2 "Birdcage" device (NO Selection is available).

General Information about the CETME Model LC rifle

Caliber: 5.56x45 mm NATO (.223 Remington)
Action: delayed blowback
Overall length: 860 mm
Barrel length: 320 mm
Weight: 3.4 kg empty
Rate of fire: 650-800 rounds per minute
Magazine capacity: 12 or 30 rounds

History of the Cetme L and variants
The Model L rifle was developed by the Spanish company CETME (now Santa Barbara SA) as an improvement over the previous CETME C. These CETME rifles, have their roots in the WW2 German MP43/MP44/Stg.45 assault rifle, developed by Mauser. After WW2, some Mauser designers moved to Spain and began working for CETME, where eventually the CETME C was developed, chambered for 7.62mm NATO cartridge. CETME continued development. In the mid 1960’s CETME design engineers began working on a smaller caliber rifle. Development was completed in 1980 when the first prototype Model L appeared using the 5.56mm cartridge. The production of the Assault Rifle Model L began in 1984, and was adopted by the Spanish army.
In 1999, this rifle was replaced in service by the H & K G36E assault rifle.
Like the all the earlier guns the CETME model L is a delayed blowback operated, selective fire assault rifle. The bolt has two parts. There are two rollers in the bolt head, which are used to accelerate the bolt body and to retard the bolt head which maintains the cartridge in the chamber until the firing pressure drops. The chamber walls are grooved to help extraction. The Model L rear sight is a simple flip-up "L" shaped sheet with two openings 200 and 400 meters. The magazine opening is designed to accept M16-type magazines.

Parts must be inspected and tested by qualified and competent gunsmith or armorer before use in a firearm.
Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.

WARNING: This product has been restricted in some states. Please visit our shipping restrictions to find out whether it is legal for us to ship this item to you PRIOR TO CHECKOUT. Always consult your local laws and ordinances.

More Information
SKU CETLKT-BNDL-6936
Length (Dimension) 13
Height (Dimension) 3
Width (Dimension) 12
Country of Manufacture Spain
Type Steel
Finish Original Finish
Manufacturer CETME, Santa Barbara, Spain
Condition USED
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account