AK-47 Barrel for Milled Receivers, Extended Journal, 7.62x39, US Made 922(r) Compliance Part, *NEW*
*NEW*, US made barrel for MILLED AK-47 receivers with extended journal, 7.62x39mm, 922(r) compliant part.
Sold individually (as pictured).
Barrels are 16 1/4" overall length, chambered in 7.62x39mm.
Muzzle threading is 14x1 LH, journal sizing is a hybrid of stamped & milled diameters.
Trunnion fit is 23mm diameter and ournal length for these barrels is extended, at 1.68" (42.65mm).
Barrels are not drilled for gas port or barrel pin, but do have the handguard retainer and extractor cuts made.
Everything forward of the trunnion journal is sized to fit AKM parts.
Trunnion end of the barrel is tapered for proper fit in a milled receiver. Barrels are not chrome lined.
Barrel will count as one (1) US 922(r) compliant part.
Parts must be inspected and tested by a qualified and competent gunsmith or armorer before use in a firearm.
Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.
*NEW*, US made barrel for MILLED AK-47 receivers with extended journal, 7.62x39mm, 922(r) compliant part.
Sold individually (as pictured).
These barrels are just what you have been looking for to complete your milled AK!
Barrels are 16 1/4" overall length, chambered in 7.62x39mm.
Muzzle threading is 14x1 LH, journal sizing is a hybrid of stamped & milled diameters.
Trunnion fit is 23mm diameter and ournal length for these barrels is extended, at 1.68" (42.65mm).
These barrels are designed to fit Bulgarian, Polish and other pattern MILLED AK receivers, and will not properly fit into a stamped receiver front trunnion.
Barrels are not drilled for gas port or barrel pin, but do have the handguard retainer and extractor cuts made.
Everything forward of the trunnion journal is sized to fit AKM parts.
Trunnion end of the barrel is tapered for proper fit in a milled receiver. Barrels are not chrome lined.
Barrel will count as one (1) US 922(r) compliant part.
Parts must be inspected and tested by a qualified and competent gunsmith or armorer before use in a firearm.
Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.
SKU | BBL-4283 |
---|---|
Weight | 1.232000 |
Length (Dimension) | 16.5 |
Height (Dimension) | 1 |
Width (Dimension) | 1 |
Country of Manufacture | United States |
Color | Plain Steel |
Finish | In The White |
Manufacturer | Made in the USA |
Condition | New |