VSKA / AKM Populated Barrel Assembly, 16", w/Trunnion & Combination Gas Block, Phosphate Finish, US Made 922(r), 7.62x39 *Very Good*
VSKA / AKM Populated Barrel Assembly with trunnion, rear sight block and combination front sight & gas block, 16 inches long, phosphate finish, US Made 922(r), 7.62x39, in *Very Good* combination.
Sold Individually.
Includes the populated barrel assembly (as pictured).
Front and rear sight blocks have been stripped of all parts.
Combination front sight block / gas block.
Front sight hood is closed.
These will require normal/regular length gas tubes.
Trunnion is fitted with the bullet guide and riveted to a torch cut section of the stamped receiver.
Phosphate finish with no stamping or markings.
Barrel has journal sizes that match milled AK-47 pattern barrel components.
The front trunnion will fit into standard AKM pattern stamped receivers, and the barrel assembly is SAAMI specification.
Muzzle threading is 14x1 LH.
May show light signs of wear from storage.
The barrel and trunnion count as two 922(r) compliant parts.
Parts must be inspected and tested by a qualified and competent gunsmith or armorer before use in a firearm.
Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.
VSKA / AKM Populated Barrel Assembly with trunnion, rear sight block and combination front sight & gas block, 16 inches long, phosphate finish, US Made 922(r), 7.62x39, in *Very Good* combination.
Sold Individually.
Includes the populated barrel assembly (as pictured).
Front and rear sight blocks have been stripped of all parts.
Combination front sight block / gas block.
Front sight hood is closed.
These will require normal/regular length gas tubes.
Trunnion is fitted with the bullet guide and riveted to a torch cut section of the stamped receiver.
Phosphate finish with no stamping or markings.
The front trunnion will fit into standard AKM pattern stamped receivers, and the barrel assembly is SAAMI specification.
Muzzle threading is 14x1 LH.
May show light signs of wear from storage.
The barrel and trunnion count as two 922(r) compliant parts.
Parts must be inspected and tested by a qualified and competent gunsmith or armorer before use in a firearm.
Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.
SKU | BBL-24418 |
---|---|
Weight | 3.300000 |
Length (Dimension) | 18 |
Height (Dimension) | 3 |
Width (Dimension) | 1.5 |
Country of Manufacture | United States |
Type | Steel |
Finish | Phosphate |
Manufacturer | Century Arms |
Condition | Very Good |
Color | Black |
Condition | Very Good |
Barrel Length | 16" |