Pre-G3 / HK M/61 Rifle Parts Kit, Early Flash Hider, Stamped Hand Guards, Bi-pod, 7.62 NATO / .308 *Fair*

As low as $1,249.95

SKU
G3KT-25595

In stock

Early H&K pre-G3 / M/61 rifle parts kit, manufactured by HK for Portugal, first pattern flash hider, stamped steel hand guards, folding bi-pod, flip sight, wood stock, .308 / 7.62x51mm NATO *Fair*

Sold as a set (as pictured).
These were used extensively in Africa fighting Portugals Colonian wars about 60 years ago.
All kits are complete, minus the barrel (available separately), and receiver.
The M/61 is the first roller locked battle rifle issued by Portugal.
The M/61 was produced by H&K in Germany, and features early parts such as the metal handguard with folding attached bipod, wood stock, early 1st type flash hider, and flip type rear sight, showing the lineage of the early CETME.
Some kits may have matching numbers on some or all of the following parts; buttstock ferrule, fire control group housing, bolt and carrier (no selection).
Cocking tube will have dings, dents and may require some adjustment to be fully functional.
Wood stock will have scratches, chips, dents or scrapes, and other wear from military service, some have a small crack.
Rare metal handguard will have dents / bends from service use , as will the bipod legs and may need to be reshaped to fit.
The hand guard does have the attaching spring still mounted.
The steel frame piece that is riveted onto the front end of the hand guard may be separated in the center with its two mount points bent inwards (see pictures).
There are photos posted showing this because many of them are that way.
Like everything with building a H&K rifle kit, skill with sheet metal and the ability to weld is required.
May show additional signs of surface rust, wear, marring, grime, etc...

WARNING: This product has been restricted in some states. Please visit our shipping restrictions to find out whether it is legal for us to ship this item to you PRIOR TO CHECKOUT. Always consult your local laws and ordinances.

Parts must be inspected and tested by qualified and competent gunsmiths or armorers before use in a firearm.
Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.


Customize Pre-G3 / HK M/61 Rifle Parts Kit, Early Flash Hider, Stamped Hand Guards, Bi-pod, 7.62 NATO / .308 *Fair*
1 x Pre-G3 / M/61 Rifle Parts Kit, Early Flash Hider, Stamped Hand Guards, Bi-pod, 7.62 NATO / .308 *Fair*   + $1,249.95

* Required Fields

Your Customization
Pre-G3 / HK M/61 Rifle Parts Kit, Early Flash Hider, Stamped Hand Guards, Bi-pod, 7.62 NATO / .308 *Fair*
Pre-G3 / HK M/61 Rifle Parts Kit, Early Flash Hider, Stamped Hand Guards, Bi-pod, 7.62 NATO / .308 *Fair*

In stock

$1,249.95

Summary

    Early H&K pre-G3 / M/61 rifle parts kit, manufactured by HK for Portugal, first pattern flash hider, stamped steel hand guards, folding bi-pod, flip sight, wood stock, .308 / 7.62x51mm NATO *Fair*

    Sold as a set (as pictured).

    Own one of the rarest variants of the iconic G3! We don't expect to ever see these kits again!
    These were used extensively in Africa fighting Portugals Colonian wars about 60 years ago.
    All kits are complete, minus the barrel (available separately), and receiver.
    The M/61 is the first roller locked battle rifle issued by Portugal.
    Later they issued the G-3 that we are familiar with today (designated M/63 by Portugal).
    The M/61 was produced by H&K in Germany, and features early parts such as the metal handguard with folding attached bipod, wood stock, early 1st type flash hider, and flip type rear sight, showing the lineage of the early CETME.

    Some kits may have matching numbers on some or all of the following parts; buttstock ferrule, fire control group housing, bolt and carrier (no selection).

    Kits have been sorted to include the following early parts:
        - Wood buttstock (may have early or late buttpad).
        - Stamped metal hand guard.
        - Integrated folding Bipod Assembly.
        - Early Cocking tube.
        - Early flip over rear sight.
        - Early style fire control housing & safety.
        - Early style flash hider.
        - Oval front sight hood/assembly.

    Cocking tube will have dings, dents and may require some adjustment to be fully functional.
    Wood stock will have scratches, chips, dents or scrapes, and other wear from military service, some have a small crack.
    Rare metal handguard will have dents / bends from service use , as will the bipod legs and may need to be reshaped to fit.
    The hand guard does have the attaching spring still mounted.
    The steel frame piece that is riveted onto the front end of the hand guard may be separated in the center with its two mount points bent inwards (see pictures).
    There are photos posted showing this because many of them are that way.
    Like everything with building a H&K rifle kit, skill with sheet metal and the ability to weld is required.
    May show additional signs of surface rust, wear, marring, grime, etc...

    WARNING: This product has been restricted in some states. Please visit our shipping restrictions to find out whether it is legal for us to ship this item to you PRIOR TO CHECKOUT. Always consult your local laws and ordinances.

    Parts must be inspected and tested by qualified and competent gunsmiths or armorers before use in a firearm.
    Not all firearm parts are interchangeable; use of surplus parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.

    More Information
    SKU G3KT-25595
    Country of Manufacture Germany
    Period Early
    Manufacturer Heckler & Koch
    Condition Good
    Condition Good
    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account
    We found other products you might like!